ISO 13567 - The Proposed International Standard for Structuring Layers in Computer Aided Building Design

Layering is a widely used method for structuring data in CAD-models. During the last few years national standardisation organisations, professional associations, user groups for particular CAD-systems, individual companies etc. have issued numerous standards and guidelines for the naming and structuring of layers in building design. In order to increase the integration of CAD data in the industry as a whole ISO recently decided to define an international standard for layer usage. The resulting standard proposal, ISO 13567, is a rather complex framework standard which strives to be more of a union than the least common denominator of the capabilities of existing guidelines. A number of principles have been followed in the design of the proposal. The first one is the separation of the conceptual organisation of information (semantics) from the way this information is coded (syntax). The second one is orthogonality - the fact that many ways of classifying information are independent of each other and can be applied in combinations. The third overriding principle is the reuse of existing national or international standards whenever appropriate. The fourth principle allows users to apply well-defined subsets of the overall superset of possible layernames. This article describes the semantic organisation of the standard proposal as well as its default syntax. Important information categories deal with the party responsible for the information, the type of building element shown, whether a layer contains the direct graphical description of a building part or additional information needed in an output drawing etc. Non-mandatory information categories facilitate the structuring of information in rebuilding projects, use of layers for spatial grouping in large multi-storey projects, and storing multiple representations intended for different drawing scales in the same model. Pilot testing of ISO 13567 is currently being carried out in a number of countries which have been involved in the definition of the standard. In the article two implementations, which have been carried out independently in Sweden and Finland, are described. The article concludes with a discussion of the benefits and possible drawbacks of the standard. Incremental development within the industry, (where ”best practice” can become ”common practice” via a standard such as ISO 13567), is contrasted with the more idealistic scenario of building product models. The relationship between CAD-layering, document management product modelling and building element classification is also discussed.

Rhetoric in international standard setting process: constructing accounting reality

The paper seeks to explore in depth the ways in which rhetorical strategies are employed in the international accounting standard setting process. The study proposes that rather than simply detailing new accounting requirements, the texts and drafts of accounting standards are artefacts, i.e. deliberately and carefully crafted products, that construct, persuade and encourage certain beliefs and behaviours. The persuasive and constructive strategies are also employed by the constituents submitting comment letters on the regulatory proposals. Consequently, the international accounting standard setting process is an ‘interactive process of meaning making’ (Fairclough, 1989). The study regards accounting as a social construct based on intersubjectivity (Searle, 1995; Davidson, 1990, 1994) and posits language as a constitutive factor in the process (Saussure, 1916; Peirce, 1931-58). This approach to the use of language and the role of rhetoric as a persuasive tool to convince others to our perception of ‘accounting reality’ is supported by the sociological work of Bourdieu (1990, 1991). Bourdieu has drawn our attention to how language becomes used, controlled, reformed and reconstituted by the social agents for the purposes of establishing their dominance. In our study we explore in particular the joint IASB and FASB proposals and subsequent regulations on the scope of consolidation and relevant disclosures that address issues of off-balance sheet financing, a subject that is very timely and of great topical importance. The analysis has revealed sophisticated rhetorical devices used by both the Boards and by the lobbyists. These reflect Aristotelian ethos, pathos and logos. The research demonstrates that those using accounting standards as well as those reading comment letters on the proposals for new standards should be aware of the normative nature of these documents and the subjectivity inherent in the nature of the text.

Procedure for verification of sound source coverage over façades according to the International Standard ISO 140-5

This paper presents a new verification procedure for sound source coverage according to ISO 140?5 requirements. The ISO 140?5 standard applies to the measurement of façade insulation and requires a sound source able to achieve a sufficiently uniform sound field in free field conditions on the façade under study. The proposed method involves the electroacoustic characterisation of the sound source in laboratory free field conditions (anechoic room) and the subsequent prediction by computer simulation of the sound free field radiated on a rectangular surface equal in size to the façade being measured. The loudspeaker is characterised in an anechoic room under laboratory controlled conditions, carefully measuring directivity, and then a computer model is designed to calculate the acoustic free field coverage for different loudspeaker positions and façade sizes. For each sound source position, the method provides the maximum direct acoustic level differences on a façade specimen and therefore determines whether the loudspeaker verifies the maximum allowed level difference of 5 dB (or 10 dB for façade dimensions greater than 5 m) required by the ISO standard. Additionally, the maximum horizontal dimension of the façade meeting the standard is calculated and provided for each sound source position, both with the 5 dB and 10 dB criteria. In the last section of the paper, the proposed procedure is compared with another method used by the authors in the past to achieve the same purpose: in situ outdoor measurements attempting to recreate free field conditions. From this comparison, it is concluded that the proposed method is able to reproduce the actual measurements with high accuracy, for example, the ground reflection effect, at least at low frequencies, which is difficult to avoid in the outdoor measurement method, and it is fully eliminated with the proposed method to achieve the free field requisite.

Influence of loudspeaker directivity and measurement geometry on direct acoustic levels over façades for acoustic insulation tests with the International Standard ISO 140-5

The International Standard ISO 140-5 on field measurements of airborne sound insulation of façades establishes that the directivity of the measurement loudspeaker should be such that the variation in the local direct sound pressure level (ΔSPL) on the sample is ΔSPL < 5 dB (or ΔSPL < 10 dB for large façades). This condition is usually not very easy to accomplish nor is it easy to verify whether the loudspeaker produces such a uniform level. Direct sound pressure levels on the ISO standard façade essentially depend on the distance and directivity of the loudspeaker used. This paper presents a comprehensive analysis of the test geometry for measuring sound insulation and explains how the loudspeaker directivity, combined with distance, affects the acoustic level distribution on the façade. The first sections of the paper are focused on analysing the measurement geometry and its influence on the direct acoustic level variations on the façade. The most favourable and least favourable positions to minimise these direct acoustic level differences are found, and the angles covered by the façade in the reference system of the loudspeaker are also determined. Then, the maximum dimensions of the façade that meet the conditions of the ISO 140-5 standard are obtained for the ideal omnidirectional sound source and the piston radiating in an infinite baffle, which is chosen as the typical radiation pattern for loudspeakers. Finally, a complete study of the behaviour of different loudspeaker radiation models (such as those usually utilised in the ISO 140-5 measurements) is performed, comparing their radiation maps on the façade for searching their maximum dimensions and the most appropriate radiation configurations.

International standard definitions for transport statistics.

Mode of access: Internet.

The high stakes game of international standard setting.

"October 1987"--P. [4].

Attitudes and management of alcohol problems in general practice: Descriptive analysis based on findings of a world health organization international collaborative survey

Aims: To determine if general practitioners' (GPs) experience of education on alcohol, support in their working environment for intervening with alcohol problems, and their attitudes have an impact on the number of patients they manage with alcohol problems. Methods: 1300 GPs from nine countries were surveyed with a postal questionnaire as part of a World Health Organization (WHO) collaborative study. Results: GPs who received more education on alcohol (OR = 1.5; 95% CI, 1.3-1.7), who perceived that they were working in a supportive environment (OR = 1.6; 95% CI, 1.4-1.9), who expressed higher role security in working with alcohol problems (OR = 2.0; 95% CI, 1.5-2.5) and who reported greater therapeutic commitment to working with alcohol problems (OR = 1.4: 95% CI, 1.1-1.7) were more likely to manage patients with alcohol-related harm. Conclusion: Both education and support in the working environment need to be provided to enhance the involvement of GPs in the management of alcohol problems.

Molecular and phylogenetic analyses of human Parvovirus B19 isolated from Brazilian patients with sickle cell disease and beta-thalassemia major and healthy blood donors

Human Parvovirus B19 (B19V) is a recognized cause of life-threatening conditions among patients with hemoglobinopathies. This study investigates B19V infection in patients with sickle cell disease and beta-thalassemia using different experimental approaches. A total of 183 individuals (144 with sickle cell disease and 39 with beta-thalassemia major) and 100 healthy blood donors were examined for B19V using anti-B19V IgG enzyme immunoassay, quantitative PCR, DNA sequencing, and phylogenetic analysis. Viremia was documented in 18.6% of patients and 1% of donors, and was generally characterized by low viral load (VL); however, acute infections were also observed. Anti-B19V IgG was detected in 65.9% of patients with sickle cell disease and in 60% of donors, whereas the patients with thalassemia exhibited relatively low seroreactivity. The seroprevalence varied among the different age groups. In patients, it progressively increased with age, whereas in donors it reached a plateau. Based on partial NS1 fragments, all isolates detected were classified as subgenotype 1A with a tendency to elicit genetically complex infections. Interestingly, quasispecies occurred in the plasma of not only patients but also donors with even higher heterogeneity. The partial NS1 sequence examined did not exhibit positive selection. Quantitation of B19V with a conservative probe is a technically and practically useful approach. The extensive spread of B19V subgenotype 1A in patients and donors and its recent introduction into the countryside of the Sao Paulo State, Brazil were demonstrated; however, it is difficult to establish a relationship between viral sequences and the clinical outcomes of the infection. J. Med. Virol. 84:16521665, 2012. (c) 2012 Wiley Periodicals, Inc.

Validation of assembled nucleic acid-based tests in diagnostic microbiology laboratories

Medical microbiology and virology laboratories use nucleic acid tests (NAT) to detect genomic material of infectious organisms in clinical samples. Laboratories choose to perform assembled (or in-house) NAT if commercial assays are not available or if assembled NAT are more economical or accurate. One reason commercial assays are more expensive is because extensive validation is necessary before the kit is marketed, as manufacturers must accept liability for the performance of their assays, assuming their instructions are followed. On the other hand, it is a particular laboratory's responsibility to validate an assembled NAT prior to using it for testing and reporting results on human samples. There are few published guidelines for the validation of assembled NAT. One procedure that laboratories can use to establish a validation process for an assay is detailed in this document. Before validating a method, laboratories must optimise it and then document the protocol. All instruments must be calibrated and maintained throughout the testing process. The validation process involves a series of steps including: (i) testing of dilution series of positive samples to determine the limits of detection of the assay and their linearity over concentrations to be measured in quantitative NAT; (ii) establishing the day-to-day variation of the assay's performance; (iii) evaluating the sensitivity and specificity of the assay as far as practicable, along with the extent of cross-reactivity with other genomic material; and (iv) assuring the quality of assembled assays using quality control procedures that monitor the performance of reagent batches before introducing new lots of reagent for testing.

Global standard for the composition of infant formula: Recommendations of an ESPGHAN coordinated international expert group

The Codex Alimentarius Commission of the Food and Agriculture Organization of the United Nations (FAO) and the World Health Organization (WHO) develops food standards, guidelines and related texts for protecting consumer health and ensuring fair trade practices globally. The major part of the world's population lives in more than 160 countries that are members of the Codex Alimentarius. The Codex Standard on Infant Formula was adopted in 1981 based on scientific knowledge available in the 1970s and is currently being revised. As part of this process, the Codex Committee on Nutrition and Foods for Special Dietary Uses asked the ESPGHAN Committee on Nutrition to initiate a consultation process with the international scientific community to provide a proposal on nutrient levels in infant formulae, based on scientific analysis and taking into account existing scientific reports on the subject. ESPGHAN accepted the request and, in collaboration with its sister societies in the Federation of International Societies on Pediatric Gastroenterology, Hepatology and Nutrition, invited highly qualified experts in the area of infant nutrition to form an International Expert Group (IEG) to review the issues raised. The group arrived at recommendations on the compositional requirements for a global infant formula standard which are reported here.

International organization

Mode of access: Internet.

Standard Essential Patent in Telecommunication Standard: United States and China Comparison

Thesis (Ph.D.)--University of Washington, 2016-08